HDShredder 7
Basic Edition
new: USB 3.0 support
HDShredder 4 now supports the USB standard in version 3.0 and its higher transfer rates.
Erase whole drives or single partitions
HDShredder deletes the contents of hard disks and other mass storage media reliably at the physical level. You can also delet single partitions instead of whole disks.
SCSI, Firewire, USB 3.0
SCSI, Firewire and USB 3.0 are supported on Windows and by the self-booting version as well.
Self-booting and on Windows
HDShredder offers a self-booting version (HDShredder/S) and a Windows application (HDShredder/W). Both versions use the same user interface, so switching between the two is no problem.
Self-booting and under Windows (New: 11/Server 2022)
Use SCSI, SAS, RAID and dynamic volumes as you always do
Each HDShredder software package now contains a Windows program (HDShredder/W) in addition to the self-booting program (HDShredder/S). With identical interfaces on both programs there is complete ease in switching between HDShredder/S and HDShredder/W.
USB 3.0 (new), Firewire and SATA-II device support
USB 3.0, Firewire and SATA-II media on the self-booting version
Deleting fast SATA-II media (internal and external via eSATA) as well as USB and Firewire hard disks or memory cards using a USB or Firewire card reader.
Licensing
HDShredder Basic Edition may be exclusively obtained as Private Workplace License (Online Shop).
Private Workplace License
A Private Workplace License allows the licensee to permanently install and use1 the product on up to two PCs, typically a PC and a notebook. Being a Private License, it may be used for non-commercial activites only.
- 1
- For temporary licenses this only applies within the corresponding period. The period can be extended after termination.
- 2
- The volume is determined upon purchase.
Hardware Requirements
Self-booting (HDShredder/S)
- 586 processor or higher
- 64 MB RAM
- VGA graphics
- bootable floppy or CD/DVD drive
Windows program (HDShredder/W)
See the hardware requirements of your Windows version.
Supported Controllers
| Controller type | self-booting | on Windows |
|---|---|---|
| PCI-IDE/ATA hard disk controller | yes | yes |
| Busmaster IDE controller | yes | yes |
| USB 1.1 (UHCI, OHCI) | yes | yes |
| USB 2.0 (EHCI) | yes | yes |
| USB 3.0 (XHCI) | yes | yes |
| Adaptec SCSI host adapter* | yes | yes |
| Other SCSI host adapter (LSI, …) | no | yes |
| SAS host adapter | no | yes |
| RAID controller | no | yes |
| AHCI (SATA II) controller | yes | yes |
| Firewire/IEEE1394 (OHCI) | yes | yes |
- *
- A complete list of Adaptec SCSI host adapters supported by HDShredder/S is to be found here.
Supported Media
| Media type | self-booting | on Windows |
|---|---|---|
| USB key drives | yes | yes |
| Dynamic volumes | no | yes |
| Hard disks | ||
| IDE, ATA, SATA, eSATA | yes | yes |
| USB, Firewire, SCSI | yes | yes |
| SSD | yes | yes |
| SAS | no | yes |
| Flash storage (with card reader) | ||
| CompactFlash | yes | yes |
| SD, MMC | yes | yes |
| xD and others | yes | yes |
Updates & Upgrades
Screenshots
